.Spot.ACabc.Breakers.ForcedCommSwitch

Information

Switching by forced change of current-voltage ratio.

Does not allow single-phase switching. This model acts directly on the current vector in the chosen reference frame and avoids any transformation of variables. To be used, if details of the switching process are not of interest.

'closed' and 'open' determine the mechanical switch-position.
Electrically the switch is on, if it is 'closed', whereas the currents start decreasing exponentially, when it is opened.

A single scalar control-input is sufficient.

The transition between the 'off' conductivity (epsG) and the 'on' resistivity (epsR) is continuous with an exponential relaxation function

  f = (exp(-dt^p/2) - exp(-1/2))/(1 - exp(-1/2))

  dt          relative time measured from switching instant
  t_relax     relaxation time
  p           power of exponent