modelTrafoIdeal
Ideal transformer, 3-phase dqo
Extends from Partials.TrafoIdealBase (Base for ideal transformer, 3-phase dqo).
Information
Ideal magnetic coupling, no stray-impedance, zero magnetisation current.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Boolean | D_D | false | set true if Delta-Delta topology! |
| Boolean | stIni_en (from TrafoIdealBase) | true | enable steady-state initial equation |
| Boolean | dynTC (from TrafoIdealBase) | false | enable dynamic tap-changing |
| Parameters.TrafoIdeal | par (from TrafoIdealBase) | trafo parameter |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Base.Interfaces.ACdqo_p | term_p (from Port_p_n) | positive terminal | |
| Base.Interfaces.ACdqo_n | term_n (from Port_p_n) | negative terminal | |
| Modelica.Blocks.Interfaces.IntegerInput | tap_p (from TrafoIdealBase) | 1: index of voltage level | |
| Modelica.Blocks.Interfaces.IntegerInput | tap_n (from TrafoIdealBase) | 2: index of voltage level |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Topology.Y | top_p (from YDportTrafo_p_n) | p: Y or Delta topology | |
| Topology.Y | top_n (from YDportTrafo_p_n) | n: Y or Delta topology | |
| SI.Voltage | v1 (from YDportTrafo_p_n) | top_p.v_cond/w1 | voltage conductor |
| SI.Current | i1 (from YDportTrafo_p_n) | top_p.i_cond*w1 | current conductor |
| SI.Voltage | v_n1 (from YDportTrafo_p_n) | top_p.v_n | voltage neutral |
| SI.Current | i_n1 (from YDportTrafo_p_n) | top_p.i_n | current neutral to ground |
| SI.Voltage | v2 (from YDportTrafo_p_n) | top_n.v_cond/w2 | voltage conductor |
| SI.Current | i2 (from YDportTrafo_p_n) | top_n.i_cond*w2 | current conductor |
| SI.Voltage | v_n2 (from YDportTrafo_p_n) | top_n.v_n | voltage neutral |
| SI.Current | i_n2 (from YDportTrafo_p_n) | top_n.i_n | current neutral to ground |