modelGenBase_el
Generation base el, synchron machines
Extends from GenBase (Generation base).
Information
Setpoint values for turbine-speed, -power and terminal-voltage are determined through the input-connector 'setpts' (see also 'governor' and 'exciter').
setpts[1]: turbine speed pu setpts[2]: turbine power pu setpts[3]: terminal voltage-norm pu
Constant setpoint values can be obtained at (steady-state) initialisation when using Control.CstSetpointsGen.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Spot.Base.Types.AngularVelocity | speed_ini (from GenBase) | 1 | initial speed (start-value if ini='st') |
| Spot.Base.Types.IniType | iniType | Spot.Base.Types.v_alpha | initialisation type (if system.ini='st') |
| Spot.Base.Types.Voltage | v_ini | 1 | initial terminal voltage |
| Modelica.SIunits.Angle | alpha_ini | system.alpha0 | initial voltage phase angle |
| Spot.Base.Types.Power | p_ini | 1 | initial terminal active power |
| Spot.Base.Types.Power | q_ini | 1 | initial terminal reactive power |
| Boolean | dispPA | false | display power angle |
| Modelica.SIunits.Time | H | 10 | inertia cst turb + gen |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Base.Interfaces.ThermalV_n | heat (from GenBase0) | heat source port {stator, rotor} | |
| Base.Interfaces.ACabc_n | term (from GenBase) | negative terminal | |
| Modelica.Blocks.Interfaces.RealInput | setpts | setpoints {speed, power, voltage} pu |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Spot.ACabc.Machines.Synchron3rd_el | generator | synchron generator | |
| Spot.Control.Exciters.ExciterConst | exciter | exciter (control) | |
| Spot.ACabc.Machines.Control.Excitation | excitation | exciter (electric) | |
| Spot.Control.Governors.GovernorConst | governor | governor (control) |
Contents
| Name | Description |
|---|---|
 atan2protected |