.SpotExamples.Data.Transformers

Information

Note: a correct value for S_nom is only needed, if you choose input in pu-units. In this case the 'nominal' values are chosen as base-values. For SI-units S_nom is not used. Nevertheless it must be defined. V_nom however is used to define the winding ratio and voltage start values.

Contents

Name Description
 TrafoIdeal1ph Ideal trafo, 1-phase, example
 TrafoStray1ph Trafo with ideal magnetic coupling, 1-phase, example
 TrafoMag1ph Trafo with magnetic coupling, 1-phase, example
 TrafoSat1ph Trafo with saturation, 1-phase, example
 TrafoIdeal Ideal trafo, 3-phase, example
 TrafoStray Trafo with ideal magnetic coupling, 3-phase, example
 TrafoMag Trafo with magnetic coupling, 3-phase, example
 TrafoSat Trafo with saturation, 3-phase, example

Generated at 2019-10-21T01:39:18Z by OpenModelicaOpenModelica 1.14.0~dev-26785-g6bb7192 using GenerateDoc.mos