modelLiquidTube

ideal - no pressure loss
Diagram of LiquidTubeOpen the diagram
▶ Check in your browser

Parameters

TypeNameDefaultDescription
IntegernSLMediumLiquid.nSubstance
Modelica.Units.SI.Concentration[nSL]c_l_start{5, 40000}
Booleanss_c2falsetrue if c_l[2] is to be a state
Modelica.Units.SI.AreaAModelica.Constants.pi/4*d_volume^2
Modelica.Units.SI.HeightHlength_out
RealN_w20number of resistances in flow direction
Modelica.Units.SI.Lengthd0.01tube diameter
Modelica.Units.SI.Lengthheight_in-0.15
Realzeta0.048
Modelica.Units.SI.Lengthlength_out0.15
Modelica.Units.SI.Diameterd_volume0.025
Modelica.Units.SI.TemperatureT_start300
Booleanp_statetruep is state
BooleanuseX_starttrue
Advanced
Modelica.Units.SI.TemperatureT_refsystemTS.T_refreference temperature

Connectors

TypeNameDefaultDescription
ThermalSeparation.Interfaces.LiquidPortInliquidIn
ThermalSeparation.Interfaces.LiquidPortOutliquidOut
Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_aheatPort

Components

TypeNameDefaultDescription
ThermalSeparation.SystemTSsystemTS
MediumLiquid.BasePropertiesmediumLiquid
MediumLiquid.BasePropertiesmediumLiquidIn
Modelica.Units.SI.Densityrho_l
Modelica.Units.SI.Concentration[nSL]c_l
Modelica.Units.SI.MoleFraction[nSL]x_l
ThermalSeparation.Units.MolarEnthalpyh_l
ThermalSeparation.Units.MolarEnthalpyu_l
Modelica.Units.SI.MolarMassMM_l
Modelica.Units.SI.MoleFraction[nSL]x_l_in
ThermalSeparation.Units.MolarEnthalpyh_l_in
Modelica.Units.SI.TemperatureT_l_in
Modelica.Units.SI.TemperatureT_l
Modelica.Units.SI.VolumeFlowRateVdot_l-liquidOut.Ndot*MM_l/rho_l
Modelica.Units.SI.VolumeFlowRateVdot_l_inliquidIn.Ndot*mediumLiquidIn.MM/mediumLiquidIn.d
Modelica.Units.SI.HeatFlowRateQdot_wall
Modelica.Units.SI.Pressurep_out
Modelica.Units.SI.Pressurep_in
Modelica.Units.SI.Concentrationdummyc_l[2]
RealaQdot_wall/(2500*max(1e-6, Vdot_l_in)*1000)
Realdelta_h
Realdelta_zeta
Modelica.Units.SI.VolumeV_liqA*H
Realsum_xsum(x_l)

Contents

NameDescription
MediumLiquid