packageThermalSeparation
Thermal Separation Library
Version 0.2
Uses Modelica 4.1.0, Modelica_StateGraph2.
Information
This library is intended to describe the following separation units:
- Rectification column
- Absorption column
For getting started please take a look at the User's Guide.
Technische Universität Hamburg
Institut für Technische Thermodynamik
Denickestraße 17
D-21073 Hamburg
Germany
Copyright © 2017, Institute of Engineering ThermoDynamics (Hamburg University of Technology (TUHH)).
This Modelica package is free software; it can be redistributed and/or modified under the terms of the Modelica license, see the license conditions and the accompanying disclaimer here.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Integer[:] | inter | {1, 3, 6, 10, 15, 21, 28, 36, 45} | number of binary interaction values depending on the number of substances |
Contents
| Name | Description |
|---|---|
| UsersGuide | Users Guide |
 Components | Components to build up a column |
 Examples | Examples |
 Wall | wall models for heat loss to ambiance |
| BalanceEquations | |
| HeatAndMassTransfer | Models for the Heat and Mass Transfer |
| PhaseEquilibrium | Models for the Phase Equilibrium between the two Phases |
| PressureLoss | Pressure Loss Models for the Vapor Flow |
| Reaction | Models for liquid reactions |
| Holdup | correlations for liquid holdup eps_liq |
| Geometry | Geometry blue prints for the different column types |
| Interfaces | Connector Classes |
| Media | Provides Media Interface for Thermal Separation |
| Utilities | |
| Units | Type Definitions |
 SystemTS | system model |
| Icons | |
| FilmModel |
Revisions
created by |
Karin Dietl & Andreas Joos & Kai Wellner & Thomas Marx-Schubach |
creation date |
01.01.2017 |
revised by |
nobody so far |
last revision |
this is an alpha version |
based on |
|
requires |
MSL 3.2.2 |
tested on |
Dymola 2017 FD01 |
contains sensitive data |
yes |