modelidealPump
Extends from Icons.Icons.Pumps.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| SI.Time | T | 10 | Delay time for outlet volume flow rate V_flow_Out |
| SI.TemperatureDifference | dT | 0.5 | Temperature increase T_Out - T_In |
| SI.VolumeFlowRate | V_flow_start | 0.000305 | Fixed initial value for outlet volume flow rate V_flow_Out |
| Integer | nSL | MediumLiquid.nSubstance | |
| SI.Concentration[nSL] | c_l_start | {5, 50000} | |
| Advanced | |||
| SI.Temperature | T_ref | systemTS.T_ref | reference temperature |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Interfaces.LiquidPortIn | liquidIn | ||
| Interfaces.LiquidPortOut | liquidOut |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| ThermalSeparation.SystemTS | systemTS | ||
| MediumLiquid.BaseProperties | mediumLiquid | ||
| MediumLiquid.BaseProperties | mediumLiquidIn | ||
| MediumLiquid.Density | rho_l | ||
| SI.Concentration[nSL] | c_l | ||
| SI.MoleFraction[nSL] | x_l | ||
| ThermalSeparation.Units.MolarEnthalpy | h_l | ||
| ThermalSeparation.Units.MolarEnthalpy | u_l | ||
| SI.MolarMass | MM_l | ||
| SI.Concentration[nSL] | c_l_in | ||
| SI.MoleFraction[nSL] | x_l_in | ||
| ThermalSeparation.Units.MolarEnthalpy | h_l_in | ||
| MediumLiquid.Temperature | T_l_in | ||
| MediumLiquid.Temperature | T_l | ||
| SI.VolumeFlowRate | Vdot_l | ||
| SI.VolumeFlowRate | Vdot_l_in | ||
| MediumLiquid.AbsolutePressure | p_out | ||
| MediumLiquid.AbsolutePressure | p_in | ||
| MediumLiquid.AbsolutePressure | p | ||
| SI.VolumeFlowRate | V_flow_delayed | ||
| SI.MassFlowRate | mdot | Vdot_l*rho_l |
Contents
| Name | Description |
|---|---|
 MediumLiquid |