modelStichlmair
Stichlmair
Extends from BaseHoldup.
Information
Correlation for liquid volume flow rate: equation (3.2) from publication [1].
[1] Stichlmair: Dimensionierung des Gas/Flüssigkeits-Kontaktapparates Bodenkolonne, Teil II, Chem. Ing. Tech. 50, Nr. 5
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Integer | n (from BaseHoldup) | ||
| Boolean | considerStartUp (from BaseHoldup) | ||
| Boolean | constProp (from BaseHoldup) | false | constant values for density and surface tension |
| SI.Density | rho_l_const (from BaseHoldup) | 1000 | constant value for liquid density |
| SI.Density | rho_v_const (from BaseHoldup) | 2 | constant value for vapour density |
| SI.SurfaceTension | sigma_const (from BaseHoldup) | 0.075 | constant value for surface tension |
| ThermalSeparation.Units.F_Factor | F_max_const | 1 | guess initial max. vapour load |
| ThermalSeparation.Units.F_Factor | F_const | 0.2 | guess initial vapour load |
| Real | time_F | 0 | time, when the F-factor shall be no longer constant, but shall be calculated |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| SI.Density[n] | rho_l (from BaseHoldup) | ||
| SI.Density[n] | rho_v (from BaseHoldup) | ||
| SI.SurfaceTension[n] | sigma (from BaseHoldup) | ||
| Real[n] | omega (from BaseHoldup) | ||
| SI.Length[n] | h (from BaseHoldup) | height of the 2ph region on the tray | |
| SI.VolumeFlowRate[n] | Vdot_v (from BaseHoldup) | vapour volume flow rate | |
| SI.VolumeFlowRate[n] | Vdot (from BaseHoldup) | ||
| Real[n] | eps_liq_2ph (from BaseHoldup) | liquid fraction in the two-phase area on the plate | |
| ThermalSeparation.Units.F_Factor[n] | F (from BaseHoldup) | F-factor based on the active area | |
| ThermalSeparation.Units.F_Factor[n] | F_max (from BaseHoldup) | maximum vapour load | |
| Geometry | geometry (from BaseHoldup) | ||
| SI.Density[n] | rho_liq (from BaseHoldup) | if constProp then fill(rho_l_const, n) else rho_l | |
| SI.Density[n] | rho_vap (from BaseHoldup) | if constProp then fill(rho_v_const, n) else rho_v | |
| SI.SurfaceTension[n] | sigma_liq (from BaseHoldup) | if constProp then fill(sigma_const, n) else sigma |