modelPipeFlow
calculation of Vdot using the particle model and zeta values
Extends from BasicPressureLossSpray (basic pressure loss model for a spray column).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Integer | n (from BasicPressureLoss) | 8 | |
| SI.Height | h | geometry.H/n | height of one discreet element |
| Real | lambda_const | 10 | lambda value must be chosen higher than in reality, otherwise the pressure loss is far too small and the simulation fails |
| Use of nominal values | |||
| Boolean | rho_const (from BasicPressureLoss) | false | rho is set constant (rho = rho_nom) for calculation of k |
| SI.Density | rho_l_nom (from BasicPressureLoss) | 1000 | |
| SI.Density | rho_v_nom (from BasicPressureLoss) | 1 | |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| MediumLiquid.ThermodynamicProperties[n] | propsLiq (from BasicPressureLoss) | ||
| MediumVapour.ThermodynamicProperties[n] | propsVap (from BasicPressureLoss) | ||
| SI.VolumeFlowRate[n] | Vdot_l (from BasicPressureLoss) | ||
| SI.Pressure[n + 1] | p (from BasicPressureLoss) | ||
| SI.VolumeFlowRate | Vdot_in (from BasicPressureLoss) | ||
| Real[n] | eps_liq (from BasicPressureLoss) | ||
| SI.VolumeFlowRate[n] | Vdot (from BasicPressureLoss) | ||
| SI.Pressure | p_v_in (from BasicPressureLoss) | ||
| HomotopyMethod | homotopyMethod (from BasicPressureLoss) | ||
| Geometry | geometry (from BasicPressureLossSpray) | ||
| SI.Density[n - 1] | rho_v_av |