blockValveTimer
Open and close valves according to degree or time input.
Extends from Modelica.Blocks.Interfaces.SO (Single Output continuous control block).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Boolean | use_angle_in | true | Enable input connector |
| Modelica.SIunits.AngularVelocity | rpm | Modelica.SIunits.Conversions.from_rpm(60) | |
| Boolean | input_in_rad | false | Input in radians, else degrees |
| Modelica.SIunits.Angle | open | Modelica.SIunits.Conversions.from_deg(170) | Half opened |
| Modelica.SIunits.Angle | close | Modelica.SIunits.Conversions.from_deg(190) | Half closed |
| Modelica.SIunits.Angle | switch | Modelica.SIunits.Conversions.from_deg(5) | Length for valve operation. |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| RealOutput | y (from SO) | Connector of Real output signal | |
| Modelica.Blocks.Interfaces.RealInput | angle_in |