blockVariableValveTimer

Open and close valves according to degree or time input.
Diagram of VariableValveTimerOpen the diagram
▶ Check in your browser

Extends from Modelica.Blocks.Interfaces.SO (Single Output continuous control block).

Parameters

TypeNameDefaultDescription
Booleanuse_angle_intrueEnable input connector
Modelica.SIunits.AngularVelocityrpmModelica.SIunits.Conversions.from_rpm(60)
Booleaninput_in_radfalseInput in radians, else degrees

Connectors

TypeNameDefaultDescription
RealOutputy (from SO)Connector of Real output signal
Modelica.Blocks.Interfaces.RealInputangle_in

Components

TypeNameDefaultDescription
Modelica.SIunits.AngleopenModelica.SIunits.Conversions.from_deg(170)Half opened
Modelica.SIunits.AnglecloseModelica.SIunits.Conversions.from_deg(190)Half closed
Modelica.SIunits.AngleswitchModelica.SIunits.Conversions.from_deg(5)Length for valve operation.