| SI.MassFlowRate | condNomFlowRate (from Condenser) | | Nominal flow rate through the condensing fluid side |
| SI.MassFlowRate | coolNomFlowRate (from Condenser) | | Nominal flow rate through the cooling fluid side |
| SI.Pressure | condNomPressure (from Condenser) | | Nominal pressure in the condensing fluid side inlet |
| SI.Pressure | coolNomPressure (from Condenser) | | Nominal pressure in the cooling fluid side inlet |
| Integer | N_cool (from Condenser) | 2 | Number of nodes of the cooling fluid side |
| SI.Area | condExchSurface (from Condenser) | | Exchange surface between condensing fluid - metal |
| SI.Area | coolExchSurface (from Condenser) | | Exchange surface between metal - cooling fluid |
| SI.Volume | condVol (from Condenser) | | Condensing fluid volume |
| SI.Volume | coolVol (from Condenser) | | Cooling fluid volume |
| SI.Volume | metalVol (from Condenser) | | Volume of the metal part in the tubes |
| SI.SpecificHeatCapacity | cm (from Condenser) | | Specific heat capacity of metal |
| SI.Density | rhoMetal (from Condenser) | | Density of metal |
| SI.CoefficientOfHeatTransfer | gamma_cond | | Coefficient of heat transfer on condensation surfaces |
| SI.CoefficientOfHeatTransfer | gamma_cool | | Coefficient of heat transfer of cooling fluid side |
| Choices.Flow1D.FFtypes | FFtype_cool | Choices.Flow1D.FFtypes.NoFriction | Friction Factor Type |
| Choices.Flow1D.HCtypes | HCtype_cool | Choices.Flow1D.HCtypes.Downstream | Location of the hydraulic capacitance |
| SI.Pressure | dpnom_cool | 0 | Nominal pressure drop (friction term only!) |
| Density | rhonom_cool | 0 | Nominal inlet density |
| Real | pi | Modelica.Constants.pi | |
| Initialization |
| SI.Pressure | pstart_cond (from Condenser) | condNomPressure | Condensing fluid pressure start value |
| SI.Volume | Vlstart_cond (from Condenser) | condVol*0.15 | Start value of the liquid water volume, condensation side |
| Boolean | SSInit (from Condenser) | false | Steady-state initialization |
