.ThermoPower.Thermal.MetalWallFV

Information

Finite volumes 1D model of a generic wall for 1D heat exchangers.

The heat capacity of the wall is accounted for, and lumped half-way between the inner and outer surfaces.

The thermal resistance of the wall is optionally accounted for by setting WallRes = true; in that case, the total heat conductance of the outer and inner half-layers of the wall must then be set. For a flat (or approximately flat) wall with surface S, thickness d and conductivity lambda, both parameters are equal to 2*S*lambda/d.

Modelling options

The following options are available:

Revisions


Generated at 2020-02-25T02:36:12Z by OpenModelicaOpenModelica 1.16.0~dev-202-gf162868 using GenerateDoc.mos