.ThermoPower.Water.SourceP

Pressure source for water/steam flows

Information

Modelling options

If R is set to zero, the pressure source is ideal; otherwise, the outlet pressure decreases proportionally to the outgoing flowrate.

If the in_p0 connector is wired, then the source pressure is given by the corresponding signal, otherwise it is fixed to p0.

If the in_h connector is wired, then the source pressure is given by the corresponding signal, otherwise it is fixed to h.

Contents

NameDescription
 MediumMedium model

Revisions


Generated at 2025-04-01T18:24:36Z by OpenModelicaOpenModelica 1.24.5 using GenerateDoc.mos