.ThermoPower.Water.SourceW

Information

Modelling options

If G is set to zero, the flowrate source is ideal; otherwise, the outgoing flowrate decreases proportionally to the outlet pressure.

If the in_w0 connector is wired, then the source pressure is given by the corresponding signal, otherwise it is fixed to p0.

If the in_h connector is wired, then the source pressure is given by the corresponding signal, otherwise it is fixed to h.

Contents

Name Description
 Medium

Revisions


Generated at 2019-10-21T01:39:18Z by OpenModelicaOpenModelica 1.14.0~dev-26785-g6bb7192 using GenerateDoc.mos