modelAccelerationBoundary
Sets and broadcasts acceleration vector, default is
fixed in negative z-direction with length of DropOfCommons.g
Extends from ThermofluidStream.Utilities.DropOfCommonsPlus (Extend this to use 'dropOfCommons', 'instanceName', 'displayInstanceName' and 'displayParameters').
Information
This component sets and broadcasts an acceleration vector. The default is fixed in negative z-direction with length of DropOfCommons.g. The acceleration can be set either by inputs or real expressions.
Beware: This is a new addition to the library. It may be subject to design reconsiderations in future versions.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| String | instanceName (from DropOfCommonsPlus) | getInstanceName() | Instance name |
| Boolean | setFromInputs | false | |
| Layout | |||
| Boolean | displayInstanceName (from DropOfCommonsPlus) | dropOfCommons.displayInstanceNames | = true, if instance name is displayed |
| Boolean | displayParameters (from DropOfCommonsPlus) | dropOfCommons.displayParameters | = true, if displaying parameters is enabled |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Interfaces.RealInput | ux | ||
| Modelica.Blocks.Interfaces.RealInput | uy | ||
| Modelica.Blocks.Interfaces.RealInput | uz |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| SI.Acceleration | ax | 0 | |
| SI.Acceleration | ay | 0 | |
| SI.Acceleration | az | -dropOfCommons.g | |
| SI.Acceleration[3] | a |
Revisions
Author: Ingela Lind, M Sc, Ph D, Technical Fellow,
Simulation and Thermal Analysis,
Vehicle Systems,
SAAB Aerosystems, 2024