.TransiEnt.Basics.Blocks.DoubleSetpointController

Similar to On/Off Controller this block switches between three states with a hysteresis defined by a bandwidth

Information

1. Purpose of model

Uses two instances of MSL hysteresis. Thereby a three point control (e.g. off, on1, on2) with hysteresis can be realized.

2. Level of detail, physical effects considered, and physical insight

(Purely technical component without physical modeling.)

3. Limits of validity

(Purely technical component without physical modeling.)

4. Interfaces

Modelica RealInput: u

Modelica RealOutput: y

5. Nomenclature

(no elements)

6. Governing Equations

(no equations)

7. Remarks for Usage

(no remarks)

8. Validation

Tested in check model "DoubleSetPointController"

9. References

(no remarks)

10. Version History

Model created by Pascal Dubucq (dubucq@tuhh.de), Aug 2014

Model revised by Pascal Dubucq (dubucq@tuhh.de), Apr 2017 : code conventions


Generated at 2025-04-02T18:24:35Z by OpenModelicaOpenModelica 1.24.5 using GenerateDoc.mos