.TransiEnt.Basics.Blocks.SwitchNoEvent

Information

1. Purpose of model

Wraps a noEvent() operator around the Modelica.Logical.Switch block to reduce state events.

The Logical.Switch switches, depending on the logical connector u2 (the middle connector) between the two possible input signals u1 (upper connector) and u3 (lower connector).

If u2 is true, the output signal y is set equal to u1, else it is set equal to u3.

2. Level of detail, physical effects considered, and physical insight

(Purely technical component without physical modeling.)

3. Limits of validity

(Purely technical component without physical modeling.)

4. Interfaces

Modelica RealInput: connector of first real input signal

Modelica BooleanInput: connector of boolean input signal

Modelica RealInput: connector of second real input signal

Modelica RealOutput: connector of real output signal

5. Nomenclature

(no elements)

6. Governing Equations

(no equations)

7. Remarks for Usage

(no remarks)

8. Validation

(no remarks)

9. References

(no remarks)

10. Version History

Model created by Pascal Dubucq (dubucq@tuhh.de), Aug 2014