modelResistor
Extends from Base.PartialSpecificElement2Pin (Partial modell for two pin Inductor, Capacitor and Resistor).
Information
1. Purpose of model
Partial model of a specific resistor using TransiEnt complex single phase interface (L2). Two pin version.
2. Level of detail, physical effects considered, and physical insight
(Purely technical component without physical modeling.)
3. Limits of validity
(Purely technical component without physical modeling.)
4. Interfaces
apparent power port epp_p
apparent power port epp_n
5. Nomenclature
(no elements)
6. Governing Equations
(no equations)
7. Remarks for Usage
(no remarks)
8. Validation
(no remarks)
9. References
(no remarks)
10. Version History
Model created by Pattrick Göttsch and revised by Pascal Dubucq (dubucq@tuhh.de) on 01.10.2014
Adjusted from three phase to single phase by Rebekka Denninger (rebekka.denninger@tuhh.de) on 01.03.2016
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| SI.Length | l (from PartialSpecificElement2Pin) | 1 | length of element |
| String | PhaseConvention (from PartialSpecificElement2Pin) | "3-Phase" | If the model is composed for one or three phase grids |
| TransiEnt.Basics.Units.SpecificResistance | r | 1 | specific Resistance |
| Boolean | electricOutput | false | Creates Outputs for loss active power and phase current |
| Thermal Properties | |||
| Boolean | thermalEffect | false | if thermal effects shall be taken into consideration by means of linear resistance expansion |
| Boolean | useHeatPort | false | if heatport should be used |
| Modelica.Units.SI.LinearTemperatureCoefficient | alpha | 0 | linear specific Resistance |
| Modelica.Units.SI.Temperature | T_ref | 293.15 | linear specific Resistance |
| Modelica.Units.SI.Temperature | T | T_ref | Actual Temperature |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| TransiEnt.Basics.Interfaces.Electrical.ApparentPowerPort | epp_p (from PartialSpecificElement2Pin) | ||
| TransiEnt.Basics.Interfaces.Electrical.ApparentPowerPort | epp_n (from PartialSpecificElement2Pin) | ||
| Modelica.Blocks.Interfaces.RealInput | T_in | ||
| TransiEnt.Basics.Interfaces.Electrical.ElectricPowerOut | P_loss | Power Lost | |
| TransiEnt.Basics.Interfaces.Electrical.ElectricPowerOut | P_loss_thermalInduced | Power Lost in comparison to no thermal induced heading | |
| TransiEnt.Basics.Interfaces.Electrical.ElectricCurrentOut | I_str | 1-Phase Current or one of the three phase currents in 3-Phase | |
| TransiEnt.Basics.Interfaces.Electrical.ElectricPowerOut | P_loss_internal | ||
| TransiEnt.Basics.Interfaces.Electrical.ElectricPowerOut | P_loss_thermalInduced_internal | ||
| TransiEnt.Basics.Interfaces.Electrical.ElectricCurrentOut | I_str_internal | ||
| Modelica.Blocks.Interfaces.RealOutput | T_internal | Temperature |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Units.SI.Resistance | R_actual |