modelJenaSecClarModTakacs

Secondary Clarifier Model based on Takacs prepared for a special plant
▶ Check in your browser

Extends from WasteWater.Icons.SecClar (Icon for a secondary clarifier), ASM3.SecClar.Takacs.Interfaces.ratios (partial model for ratios of solid components).

Information

This component models an ASM3 10 - layer secondary clarifier with 6 layers above the feed_layer (including top_layer)
and 3 layers below the feed_layer (including bottom_layer).

Parameters:
  hsc -  height of clarifier [m]
  n   -  number of layers
  Asc -  surface area of sec. clar. [m2]
  Xt  -  threshold value for Xtss [mg/l]

Parameters

TypeNameDefaultDescription
SI.Lengthhsc4.0height of secondary clarifier
Integern10number of layers of SC model
SI.Lengthzmhsc/(1.0*n)height of m-th secondary clarifier layer
SI.AreaAsc1500.0area of secondary clarifier
WWU.MassConcentrationXt3000.0threshold for X

Connectors

TypeNameDefaultDescription
WI.WWFlowAsm3outEffluent
WI.WWFlowAsm3outReturn
WI.WWFlowAsm3outWaste

Components

TypeNameDefaultDescription
RealrXi (from ratios)
RealrXs (from ratios)
RealrXh (from ratios)
RealrXsto (from ratios)
RealrXa (from ratios)
WWU.MassConcentrationXftotal sludge concentration in clarifier feed
WI.WWFlowAsm3inFeed
SCP.bottom_layerS1
SCP.lower_layerS2
SCP.lower_layerS3
SCP.feed_layerS4
SCP.upper_layerS5
SCP.upper_layerS6
SCP.upper_layerS7
SCP.upper_layerS8
SCP.upper_layerS9
SCP.top_layerS10

Contents

NameDescription
SCP
SI
WI
WWU