| dhcSim.Fluid.Types.FeedingTemperatureCon | retTempType | dhcSim.Fluid.Types.FeedingTemperatureCon.fixed | Define how return temperature is caclulated |
| Modelica.SIunits.Temperature | TNetRetSet | Medium.T_default | Return temperature if retTempType=fixed |
| Modelica.SIunits.TemperatureDifference | deltaT | 5 | Temperature difference between inlet and outlet if retTempType = dTFix |
| Flow resistance |
| Boolean | computeFlowResistance (from TwoPortFlowResistanceParameters) | true | =true, compute flow resistance. Set to false to assume no friction |
| Boolean | from_dp (from TwoPortFlowResistanceParameters) | false | = true, use m_flow = f(dp) else dp = f(m_flow) |
| Boolean | linearizeFlowResistance (from TwoPortFlowResistanceParameters) | false | = true, use linear relation between m_flow and dp for any flow rate |
| Real | deltaM (from TwoPortFlowResistanceParameters) | 0.1 | Fraction of nominal flow rate where flow transitions to laminar |
| Nominal condition |
| Modelica.Units.SI.PressureDifference | dp_nominal (from TwoPortFlowResistanceParameters) | | Pressure difference |
| Modelica.SIunits.MassFlowRate | m_flow_nominal (from FourPortModulesParameters) | | Nominal mass flow rate |
| Modelica.SIunits.HeatFlowRate | Q_flow_nominal | | Nominal heat flow rate |
| Modelica.SIunits.Temperature | TNetIn_nominal | Medium.T_default | Nominal Temperature of inflow at network side |
| Modelica.SIunits.Temperature | TNetOut_nominal | Medium.T_default | Nominal Temperature of outflow at network side |
| Modelica.SIunits.Temperature | TBuiIn_nominal | Medium.T_default | Nominal Temperature of inflow at building side |
| Modelica.SIunits.Temperature | TBuiOut_nominal | Medium.T_default | Nominal Temperature of outflow at building side |
| Assumptions |
| Boolean | allowFlowReversal (from FourPortModulesParameters) | true | = true to allow flow reversal, false restricts to design direction (port_a -> port_b) |
| Advanced › Diagnostics |
| Boolean | show_T (from FourPortModulesParameters) | false | = true, if actual temperature at port is computed |
| Advanced |
| Modelica.SIunits.MassFlowRate | m_flow_small (from FourPortModulesParameters) | 1E-4*abs(m_flow_nominal) | Small mass flow rate for regularization of zero flow |
