modelQControl_Type4B
Developed by DTU
Information
Development level |
2 |
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Real | Tpfilt | Power measurement filter time constant | |
| Real | MwttPF | Power factor control mode | |
| Real | MwttU | Voltage control mode | |
| Real | MwttOL | Open loop mode | |
| Real | Uref0 | User defined voltage reference | |
| Real | Tangent_phi | Calculated from power factor setpoint | |
| Real | Qmax | Maximum reactive power | |
| Real | Qmin | Minimum reactive power | |
| Real | Tufilt | Voltage measurement filter time constant | |
| Real | Uqdip | Voltage threshold value for LVRT detection | |
| Real | Tpost | Length of time period where post fault reactive power is injected | |
| Real | Udb1 | Voltage dead band lower limit | |
| Real | Udb2 | Voltage dead band upper limit | |
| Real | Kqv | Voltage scaling factor for LVRT current | |
| Real | iqh1 | Maximum reactive current injection during dip | |
| Real | iqmin | Minimum reactive current injection | |
| Real | iqmax | Maximum reactive current injection | |
| Real | iq_post | Post fault reactive current injection | |
| Real | Umax | Maximum voltage in voltage PI controller integral term | |
| Real | Umin | Minimum voltage in voltage PI controller integral term | |
| Real | KiQ | Reactive power PI controller integration gain | |
| Real | KpQ | Reactive power PI controller proportional gain | |
| Real | Tqord | Time constant in reactive power order lag | |
| Real | KiU | Voltage PI controller integration gain | |
| Real | KpU | Voltage PI controller proportional gain | |
| Real | Tiq | Time constant in reactive current lag | |
| Real | ini_Pwtt | Initial value of the state (Active power order lag) | |
| Real | ini_Uwtt | Initial value of the state (Voltage order lag) | |
| Real | ini_Qpi | Initial value of the state (Reactive power PI controller) | |
| Real | ini_Qwtt | Initial value of the state (Reactive power order lag) | |
| Real | ini_Iqwtt | Initial reactive current | |
| Real | Rdroop | Resistive component of voltage drop impedance | |
| Real | Xdroop | Inductive component of voltage drop impedance |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Interfaces.RealInput | Uref | ||
| Modelica.Blocks.Interfaces.RealInput | Qref | ||
| Modelica.Blocks.Interfaces.RealInput | Qwtt | ||
| Modelica.Blocks.Interfaces.RealInput | Pwtt | ||
| Modelica.Blocks.Interfaces.RealInput | Uwtt | ||
| Modelica.Blocks.Interfaces.RealOutput | Iqcmd | ||
| Modelica.Blocks.Interfaces.RealOutput | F_LVRT |
Components
Revisions
Copyright 2015-2016 RTE (France), SmarTS Lab (Sweden), AIA (Spain) and DTU (Denmark)
- RTE: http://www.rte-france.com
- SmarTS Lab, research group at KTH: https://www.kth.se/en
- AIA: http://www.aia.es/en/energy
- DTU: http://www.dtu.dk/english
The authors can be contacted by email: info@itesla-ipsl.org
This Source Code Form is subject to the terms of the Mozilla Public License, v. 2.0.
If a copy of the MPL was not distributed with this file, You can obtain one at http://mozilla.org/MPL/2.0.