.Annex60.Fluid.Examples.SimpleHouse

Information

This model contains a simple model of a house with a heating system, ventilation and weather boundary conditions. It servers as a demonstration case of how the Annex60 library can be used.

Contents

Name	Description
MediumAir
MediumWater

Revisions

• November 10, 2016, by Michael Wetter:
  Connected supply air temperature to outdoor air temperature, added cooling to supply air, changed capacity of heating system, switched heating pump off when heater is off, and added proportional controller for the air damper.
  This is for #584.
• September 9, 2016, by Michael Wetter:
  Corrected error in window model, as the solar heat gain was not multiplied with the window area. Dymola 2017 reported this error due to mismatching units of W/m2 and W.
• June 23, 2016, by Michael Wetter:
  Changed graphical annotation.
• March 11, 2016, by Michael Wetter:
  Corrected wrong limits for hysAir so that uLow < uHigh. This is for #429.
• January 22, 2016, by Michael Wetter:
  Corrected type declaration of pressure difference. This is for #404.
• September 19, 2015, by Filip Jorissen:
  First implementation.