This model contains a simple model of a house
with a heating system, ventilation and weather boundary conditions.
It servers as a demonstration case of how the IBPSA library can be used.
Contents
-
June 15, 2022, by Hongxiang Fu:
Changed conDam.yMin from 0.1 to 0.25.
This is for
IBPSA, #1624.
-
May 8, 2017, by Michael Wetter:
Updated heater model.
This is for
IBPSA, #763.
-
November 10, 2016, by Michael Wetter:
Connected supply air temperature to outdoor air temperature,
added cooling to supply air,
changed capacity of heating system, switched heating pump off when heater is off,
and added proportional controller for the air damper.
This is
for #584.
-
September 9, 2016, by Michael Wetter:
Corrected error in window model, as the solar heat gain was
not multiplied with the window area. Dymola 2017 reported this
error due to mismatching units of W/m2 and W.
-
June 23, 2016, by Michael Wetter:
Changed graphical annotation.
-
March 11, 2016, by Michael Wetter:
Corrected wrong limits for hysAir so that
uLow < uHigh.
This is
for #429.
-
January 22, 2016, by Michael Wetter:
Corrected type declaration of pressure difference.
This is
for #404.
-
September 19, 2015, by Filip Jorissen:
First implementation.
Generated at 2024-11-21T19:25:40Z
by OpenModelicaOpenModelica 1.24.2 using GenerateDoc.mos
.BuildSysPro.IBPSA.Fluid.Examples.SimpleHouse
MediumAir
MediumWater