.BuildingSystems.Electrical.AC.OnePhase.Lines.Examples.ACLine_R

Information

This example demonstrates how to use a resistive line model to connect a source to a load.

The model has four different loads. The load sc_load represents a short circuit R=0. The current that flows through the load depends on the resistance of the line.

The remaining three loads R1, R2, and R3 are resistive loads. Each load is connected to the source with different configurations, however the equivalent resistance between each load and the source is the same. Since the equivalent resistances are the same, each load draw the same current.

Revisions

• August 24, 2014, by Marco Bonvini:
  Documentation and example revised.