.BuildingSystems.Electrical.AC.ThreePhasesUnbalanced.Lines.Examples.ACLine

Test model for a three-phase unbalanced commercial cable without neutral

Information

This example demonstrates how to use a cable model without neutral line to connect a source to a load.

The model has three resistive loads R1, R2, and R3. Each load is connected to the source with different configurations, but the equivalent resistance between each load and the source is the same. Since the equivalent resistances are the same, each load draws the same current.

Revisions


Generated at 2025-04-03T18:24:42Z by OpenModelicaOpenModelica 1.24.5 using GenerateDoc.mos