.BuildingSystems.Electrical.AC.ThreePhasesUnbalanced.Lines.Examples.ACLine_L .BuildingSystems.Electrical.AC.ThreePhasesUnbalanced.Lines.Examples.ACLine_LThis example demonstrates how to use a purely inductive line model to connect a source to a load.
The model has four different loads. The load
sc_load represents a short circuit R=0. The
current that flows through the load depends on the resistance of
the line.
The remaining three loads L1, L2, and
L3 are inductive loads. Each load is connected to the
source with different configurations, but the equivalent impedance
between each load and the source is the same. Since the equivalent
impedances are the same, each load draws the same current.