.BuildingSystems.Electrical.AC.ThreePhasesUnbalanced.Lines.Examples.ACLine_L_N

Information

This example demonstrates how to use a purely inductive line model with neutral cable to connect a source to a load.

The model has four different loads. The load sc_load represents a short circuit R=0. The current that flows through the load depends on the resistance of the line.

The remaining three loads L1, L2, and L3 are inductive loads. Each load is connected to the source with different configurations, but the equivalent impedance between each load and the source is the same. Since the equivalent impedances are the same, each load draws the same current.

Revisions

• January 14, 2015, by Marco Bonvini:
  Created model and documentation.