.BuildingSystems.Electrical.AC.ThreePhasesUnbalanced.Lines.TwoPortMatrixRL_N

Information

Resistive-inductive model that connects two AC three-phase unbalanced interfaces with neutral line. This model can be used to represent a cable in a three-phase unbalanced AC system. The voltage between the ports is

where V_i^{p,n} is the voltage phasor at the connector p or n of the i-th phase, while I_i^p the current phasor entering from the connector p of the i-th phase.

The model is parameterized with an impedance matrix Z. The matrix is symmetric thus just the upper triangular part of it has to be defined.

Note

The fourth line is the neutral one.

Revisions

• April 5, 2023, by Michael Wetter:
  Set nominal attribute for voltage at terminal.
• November 28, 2016, by Michael Wetter:
  Made current and voltage public to allow setting start values.
  This is for #584.
• November 28, 2016, by Michael Wetter:
  Removed zero start value for currents i1, i2 and i3. Setting a zero start value led Dymola 2017 on Linux to find a different solution for BuildingSystems.Electrical.AC.ThreePhasesUnbalanced.Validation.IEEETests.Test4NodesFeeder.BalancedStepDown.YD. Also, the current is typically non-zero and zero is anyway the default start value, hence there is no need to set it.
  This is for #584.
• January 14, 2015, by Marco Bonvini:
  Created model and documantation.