This model represents a partial interface for a three-phase AC unbalanced load without neutral cable.
The loads on each phase can be removed using the boolean flags
plugPhase1
, plugPhase2
, and plugPhase3
.
These parameters can be used to generate unbalanced loads.
The loads can be connected either in wye (Y) or delta (D) configuration.
The parameter loadConn
can be used for such a purpose.
Each load model has the option to be controlled by a voltage controller. When enabled, the voltage controller unplugs the load for a certain amount of time if the voltage exceeds a given threshold. Mode information about the voltage controller can be found here.