Controller to enable or disable storage tank charging
Adapted
fromBuildings.DHC.Loads.HotWater.BaseClasses.TankChargingController.
- The hysteresis parameters are exposed.
- Added a routing block so that it could be applied to both hot
and cold tanks, i.e. either the top or bottom of the tank could be
the supply side or the return side.
- June 13, 2025, by Michael Wetter:
Refactored implementation.
- November 15, 2023, by David Blum:
Add that charging is stopped when bottom temperature reaches set
point.
- October 4, 2023, by Michael Wetter:
First implementation.
Generated at 2026-07-21T20:30:55Z by OpenModelicaOpenModelica 1.27.0 using
GenerateDoc.mos
.Buildings.DHC.ETS.Combined.Controls.TankChargingController