.Buildings.DHC.Loads.BaseClasses.BuildingSpawnZ1

One-zone EnergyPlus building model

Information

This is a simplified one-zone building model based on EnergyPlus building envelope model. The heating and cooling loads are computed with a four-pipe fan coil unit model derived from Buildings.DHC.Loads.BaseClasses.PartialTerminalUnit and connected to the room model by means of fluid ports.

Contents

NameDescription
 Medium2Load side medium

Revisions


Generated at 2025-04-03T18:24:42Z by OpenModelicaOpenModelica 1.24.5 using GenerateDoc.mos