.Buildings.DHC.Loads.BaseClasses.BuildingSpawnZ6

Six-zone EnergyPlus building model based on URBANopt GeoJSON export, with distribution pumps

Information

This is a simplified six-zone building model based on an EnergyPlus building envelope model. It was generated from translating a GeoJSON model specified within the URBANopt UI. The heating and cooling loads are computed with a four-pipe fan coil unit model derived from Buildings.DHC.Loads.BaseClasses.PartialTerminalUnit and connected to the room model by means of fluid ports. The Attic zone is unconditionned, with a free floating temperature.

Contents

NameDescription
 Medium2Medium model

Revisions

Generated at 2025-10-30T19:21:05Z by OpenModelicaOpenModelica 1.25.5 using GenerateDoc.mos