Performance data for chiller model.
This data corresponds to the following EnergyPlus model:
Chiller:Electric:ReformulatedEIR,
ReformEIRChiller Carrier 19XL 1779kW/6.18COP/Vanes, !- Name
1779400, !- Reference Capacity {W}
6.18, !- Reference COP {W/W}
6.67, !- Reference Leaving Chilled Water Temperature {C}
31.69, !- Reference Leaving Condenser Water Temperature {C}
0.06303, !- Reference Chilled Water Flow Rate {m3/s}
0.08858, !- Reference Condenser Water Flow Rate {m3/s}
ReformEIRChiller Carrier 19XL 1779kW/6.18COP/Vanes CAPFT, !- Cooling Capacity Function of Temperature Curve Name
ReformEIRChiller Carrier 19XL 1779kW/6.18COP/Vanes EIRFT, !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name
ReformEIRChiller Carrier 19XL 1779kW/6.18COP/Vanes EIRFPLR, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name
0.20, !- Minimum Part Load Ratio
1.03, !- Maximum Part Load Ratio
1.0, !- Optimum Part Load Ratio
0.20, !- Minimum Unloading Ratio
Chilled Water Side Inlet Node, !- Chilled Water Inlet Node Name
Chilled Water Side Outlet Node, !- Chilled Water Outlet Node Name
Condenser Side Inlet Node, !- Condenser Inlet Node Name
Condenser Side Outlet Node, !- Condenser Outlet Node Name
1.0, !- Compressor Motor Efficiency
2.0, !- Leaving Chilled Water Lower Temperature Limit {C}
ConstantFlow, !- Chiller Flow Mode Type
0.0; !- Design Heat Recovery Water Flow Rate {m3/s}
record ReformEIRChiller_Carrier_19XL_1779kW_6_18COP_Vanes = Buildings.Fluid.Chillers.Data.ElectricReformulatedEIR.Generic(QEva_flow_nominal = -1779400, COP_nominal = 6.18, PLRMin = 0.20, PLRMinUnl = 0.20, PLRMax = 1.03, mEva_flow_nominal = 1000*0.06303, mCon_flow_nominal = 1000*0.08858, TEvaLvg_nominal = 273.15 + 6.67, TConLvg_nominal = 273.15 + 31.69, TEvaLvgMin = 273.15 + 4.44, TEvaLvgMax = 273.15 + 8.89, TConLvgMin = 273.15 + 20.83, TConLvgMax = 273.15 + 32.12, capFunT = {-7.421879E-02, -6.864609E-02, -6.656797E-03, 9.778610E-02, -2.680195E-03, 6.765638E-03}, EIRFunT = {5.396428E-01, -3.183208E-02, 1.041725E-03, 2.112772E-02, 4.504330E-05, -4.947764E-04}, EIRFunPLR = {7.137642E-01, -3.096191E-02, 1.459047E-04, 8.907204E-01, -1.051301E+00, 2.348095E-02, 0.000000E+00, 5.406677E-01, 0.000000E+00, 0.000000E+00}, etaMotor = 1.0);
Generated at 2024-11-22T19:25:38Z
by OpenModelicaOpenModelica 1.24.2 using GenerateDoc.mos