Performance data for chiller model.
This data corresponds to the following EnergyPlus model:
Chiller:Electric:ReformulatedEIR,
ReformEIRChiller Carrier 19XL 1871kW/6.49COP/Vanes, !- Name
1870800, !- Reference Capacity {W}
6.49, !- Reference COP {W/W}
6.67, !- Reference Leaving Chilled Water Temperature {C}
32.00, !- Reference Leaving Condenser Water Temperature {C}
0.06303, !- Reference Chilled Water Flow Rate {m3/s}
0.0877, !- Reference Condenser Water Flow Rate {m3/s}
ReformEIRChiller Carrier 19XL 1871kW/6.49COP/Vanes CAPFT, !- Cooling Capacity Function of Temperature Curve Name
ReformEIRChiller Carrier 19XL 1871kW/6.49COP/Vanes EIRFT, !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name
ReformEIRChiller Carrier 19XL 1871kW/6.49COP/Vanes EIRFPLR, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name
0.19, !- Minimum Part Load Ratio
1.03, !- Maximum Part Load Ratio
1.0, !- Optimum Part Load Ratio
0.19, !- Minimum Unloading Ratio
Chilled Water Side Inlet Node, !- Chilled Water Inlet Node Name
Chilled Water Side Outlet Node, !- Chilled Water Outlet Node Name
Condenser Side Inlet Node, !- Condenser Inlet Node Name
Condenser Side Outlet Node, !- Condenser Outlet Node Name
1.0, !- Compressor Motor Efficiency
2.0, !- Leaving Chilled Water Lower Temperature Limit {C}
ConstantFlow, !- Chiller Flow Mode Type
0.0; !- Design Heat Recovery Water Flow Rate {m3/s}
record ReformEIRChiller_Carrier_19XL_1871kW_6_49COP_Vanes = Buildings.Fluid.Chillers.Data.ElectricReformulatedEIR.Generic(QEva_flow_nominal = -1870800, COP_nominal = 6.49, PLRMin = 0.19, PLRMinUnl = 0.19, PLRMax = 1.03, mEva_flow_nominal = 1000*0.06303, mCon_flow_nominal = 1000*0.0877, TEvaLvg_nominal = 273.15 + 6.67, TConLvg_nominal = 273.15 + 32.00, TEvaLvgMin = 273.15 + 4.44, TEvaLvgMax = 273.15 + 8.89, TConLvgMin = 273.15 + 20.92, TConLvgMax = 273.15 + 35.06, capFunT = {-7.422008E-01, -5.893189E-02, -6.359815E-03, 1.450953E-01, -3.416848E-03, 5.905773E-03}, EIRFunT = {1.182368E+00, -6.852914E-02, 2.718010E-03, -1.693531E-02, 6.861400E-04, 4.136164E-05}, EIRFunPLR = {1.085769E+00, -5.971095E-02, 1.041798E-04, 7.182300E-01, -5.729312E-01, 5.367072E-02, 0.000000E+00, -1.472327E-01, 0.000000E+00, 0.000000E+00}, etaMotor = 1.0);
Generated at 2024-11-22T19:25:38Z
by OpenModelicaOpenModelica 1.24.2 using GenerateDoc.mos