Performance data for chiller model.
This data corresponds to the following EnergyPlus model:
Chiller:Electric:ReformulatedEIR,
ReformEIRChiller Carrier 19XL 2057kW/6.05COP/Vanes, !- Name
2057200, !- Reference Capacity {W}
6.05, !- Reference COP {W/W}
7.78, !- Reference Leaving Chilled Water Temperature {C}
29.79, !- Reference Leaving Condenser Water Temperature {C}
0.08322, !- Reference Chilled Water Flow Rate {m3/s}
0.09722, !- Reference Condenser Water Flow Rate {m3/s}
ReformEIRChiller Carrier 19XL 2057kW/6.05COP/Vanes CAPFT, !- Cooling Capacity Function of Temperature Curve Name
ReformEIRChiller Carrier 19XL 2057kW/6.05COP/Vanes EIRFT, !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name
ReformEIRChiller Carrier 19XL 2057kW/6.05COP/Vanes EIRFPLR, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name
0.28, !- Minimum Part Load Ratio
1.03, !- Maximum Part Load Ratio
1.0, !- Optimum Part Load Ratio
0.28, !- Minimum Unloading Ratio
Chilled Water Side Inlet Node, !- Chilled Water Inlet Node Name
Chilled Water Side Outlet Node, !- Chilled Water Outlet Node Name
Condenser Side Inlet Node, !- Condenser Inlet Node Name
Condenser Side Outlet Node, !- Condenser Outlet Node Name
1.0, !- Compressor Motor Efficiency
2.0, !- Leaving Chilled Water Lower Temperature Limit {C}
ConstantFlow, !- Chiller Flow Mode Type
0.0; !- Design Heat Recovery Water Flow Rate {m3/s}
record ReformEIRChiller_Carrier_19XL_2057kW_6_05COP_Vanes = Buildings.Fluid.Chillers.Data.ElectricReformulatedEIR.Generic(QEva_flow_nominal = -2057200, COP_nominal = 6.05, PLRMin = 0.28, PLRMinUnl = 0.28, PLRMax = 1.03, mEva_flow_nominal = 1000*0.08322, mCon_flow_nominal = 1000*0.09722, TEvaLvg_nominal = 273.15 + 7.78, TConLvg_nominal = 273.15 + 29.79, TEvaLvgMin = 273.15 + 4.44, TEvaLvgMax = 273.15 + 8.89, TConLvgMin = 273.15 + 17.89, TConLvgMax = 273.15 + 35.37, capFunT = {6.448091E-01, -3.315001E-02, -3.168485E-03, 3.196459E-02, -1.138880E-03, 3.799700E-03}, EIRFunT = {7.341312E-01, -7.592418E-02, -2.065951E-03, 3.153945E-02, -8.888217E-04, 3.650961E-03}, EIRFunPLR = {1.353291E-01, -5.973382E-03, -2.152787E-05, 1.844856E+00, -2.868168E+00, 7.003543E-03, 0.000000E+00, 1.875512E+00, 0.000000E+00, 0.000000E+00}, etaMotor = 1.0);
Generated at 2024-11-22T19:25:38Z
by OpenModelicaOpenModelica 1.24.2 using GenerateDoc.mos