Performance data for chiller model.
This data corresponds to the following EnergyPlus model:
Chiller:Electric:ReformulatedEIR,
ReformEIRChiller Carrier 19XR 1157kW/5.62COP/VSD, !- Name
1156900, !- Reference Capacity {W}
5.62, !- Reference COP {W/W}
5.56, !- Reference Leaving Chilled Water Temperature {C}
31.34, !- Reference Leaving Condenser Water Temperature {C}
0.02801, !- Reference Chilled Water Flow Rate {m3/s}
0.03186, !- Reference Condenser Water Flow Rate {m3/s}
ReformEIRChiller Carrier 19XR 1157kW/5.62COP/VSD CAPFT, !- Cooling Capacity Function of Temperature Curve Name
ReformEIRChiller Carrier 19XR 1157kW/5.62COP/VSD EIRFT, !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name
ReformEIRChiller Carrier 19XR 1157kW/5.62COP/VSD EIRFPLR, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name
0.19, !- Minimum Part Load Ratio
1.01, !- Maximum Part Load Ratio
1.0, !- Optimum Part Load Ratio
0.19, !- Minimum Unloading Ratio
Chilled Water Side Inlet Node, !- Chilled Water Inlet Node Name
Chilled Water Side Outlet Node, !- Chilled Water Outlet Node Name
Condenser Side Inlet Node, !- Condenser Inlet Node Name
Condenser Side Outlet Node, !- Condenser Outlet Node Name
1.0, !- Compressor Motor Efficiency
2.0, !- Leaving Chilled Water Lower Temperature Limit {C}
ConstantFlow, !- Chiller Flow Mode Type
0.0; !- Design Heat Recovery Water Flow Rate {m3/s}
record ReformEIRChiller_Carrier_19XR_1157kW_5_62COP_VSD = Buildings.Fluid.Chillers.Data.ElectricReformulatedEIR.Generic(QEva_flow_nominal = -1156900, COP_nominal = 5.62, PLRMin = 0.19, PLRMinUnl = 0.19, PLRMax = 1.01, mEva_flow_nominal = 1000*0.02801, mCon_flow_nominal = 1000*0.03186, TEvaLvg_nominal = 273.15 + 5.56, TConLvg_nominal = 273.15 + 31.34, TEvaLvgMin = 273.15 + 5.56, TEvaLvgMax = 273.15 + 10.00, TConLvgMin = 273.15 + 21.97, TConLvgMax = 273.15 + 34.50, capFunT = {1.095494E+00, -5.546137E-03, -5.186584E-04, 1.420446E-03, -2.801603E-04, 1.007864E-03}, EIRFunT = {1.221566E+00, -2.771462E-02, 1.220059E-03, -2.228215E-02, 7.578438E-04, -8.532836E-04}, EIRFunPLR = {2.260949E-01, -1.619690E-02, 2.953765E-06, 4.956395E-01, 1.180777E-01, 1.582337E-02, 0.000000E+00, 1.675772E-01, 0.000000E+00, 0.000000E+00}, etaMotor = 1.0);
Generated at 2024-12-28T19:26:00Z
by OpenModelicaOpenModelica 1.24.3 using GenerateDoc.mos