Performance data for chiller model.
This data corresponds to the following EnergyPlus model:
Chiller:Electric:ReformulatedEIR,
ReformEIRChiller Carrier 19XR 1284kW/6.20COP/Vanes, !- Name
1283500, !- Reference Capacity {W}
6.20, !- Reference COP {W/W}
5.56, !- Reference Leaving Chilled Water Temperature {C}
29.46, !- Reference Leaving Condenser Water Temperature {C}
0.03684, !- Reference Chilled Water Flow Rate {m3/s}
0.05337, !- Reference Condenser Water Flow Rate {m3/s}
ReformEIRChiller Carrier 19XR 1284kW/6.20COP/Vanes CAPFT, !- Cooling Capacity Function of Temperature Curve Name
ReformEIRChiller Carrier 19XR 1284kW/6.20COP/Vanes EIRFT, !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name
ReformEIRChiller Carrier 19XR 1284kW/6.20COP/Vanes EIRFPLR, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name
0.20, !- Minimum Part Load Ratio
1.02, !- Maximum Part Load Ratio
1.0, !- Optimum Part Load Ratio
0.20, !- Minimum Unloading Ratio
Chilled Water Side Inlet Node, !- Chilled Water Inlet Node Name
Chilled Water Side Outlet Node, !- Chilled Water Outlet Node Name
Condenser Side Inlet Node, !- Condenser Inlet Node Name
Condenser Side Outlet Node, !- Condenser Outlet Node Name
1.0, !- Compressor Motor Efficiency
2.0, !- Leaving Chilled Water Lower Temperature Limit {C}
ConstantFlow, !- Chiller Flow Mode Type
0.0; !- Design Heat Recovery Water Flow Rate {m3/s}
record ReformEIRChiller_Carrier_19XR_1284kW_6_20COP_Vanes = Buildings.Fluid.Chillers.Data.ElectricReformulatedEIR.Generic(QEva_flow_nominal = -1283500, COP_nominal = 6.20, PLRMin = 0.20, PLRMinUnl = 0.20, PLRMax = 1.02, mEva_flow_nominal = 1000*0.03684, mCon_flow_nominal = 1000*0.05337, TEvaLvg_nominal = 273.15 + 5.56, TConLvg_nominal = 273.15 + 29.46, TEvaLvgMin = 273.15 + 5.56, TEvaLvgMax = 273.15 + 8.89, TConLvgMin = 273.15 + 19.55, TConLvgMax = 273.15 + 30.85, capFunT = {1.115795E+00, -2.963853E-02, -1.135671E-03, 4.184083E-03, -4.382921E-04, 2.096512E-03}, EIRFunT = {7.586434E-01, -1.231609E-02, 1.784584E-03, -2.678401E-03, 6.302421E-04, -1.385469E-03}, EIRFunPLR = {9.435414E-01, -6.553709E-02, 1.115089E-04, 1.530548E+00, -1.486930E+00, 6.031382E-02, 0.000000E+00, 7.320523E-02, 0.000000E+00, 0.000000E+00}, etaMotor = 1.0);
Generated at 2024-12-28T19:26:00Z
by OpenModelicaOpenModelica 1.24.3 using GenerateDoc.mos