Performance data for chiller model.
This data corresponds to the following EnergyPlus model:
Chiller:Electric:ReformulatedEIR,
ReformEIRChiller Carrier 19XR 1403kW/7.09COP/VSD, !- Name
1403100, !- Reference Capacity {W}
7.09, !- Reference COP {W/W}
6.67, !- Reference Leaving Chilled Water Temperature {C}
21.78, !- Reference Leaving Condenser Water Temperature {C}
0.03426, !- Reference Chilled Water Flow Rate {m3/s}
0.04252, !- Reference Condenser Water Flow Rate {m3/s}
ReformEIRChiller Carrier 19XR 1403kW/7.09COP/VSD CAPFT, !- Cooling Capacity Function of Temperature Curve Name
ReformEIRChiller Carrier 19XR 1403kW/7.09COP/VSD EIRFT, !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name
ReformEIRChiller Carrier 19XR 1403kW/7.09COP/VSD EIRFPLR, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name
0.17, !- Minimum Part Load Ratio
1.03, !- Maximum Part Load Ratio
1.0, !- Optimum Part Load Ratio
0.17, !- Minimum Unloading Ratio
Chilled Water Side Inlet Node, !- Chilled Water Inlet Node Name
Chilled Water Side Outlet Node, !- Chilled Water Outlet Node Name
Condenser Side Inlet Node, !- Condenser Inlet Node Name
Condenser Side Outlet Node, !- Condenser Outlet Node Name
1.0, !- Compressor Motor Efficiency
2.0, !- Leaving Chilled Water Lower Temperature Limit {C}
ConstantFlow, !- Chiller Flow Mode Type
0.0; !- Design Heat Recovery Water Flow Rate {m3/s}
record ReformEIRChiller_Carrier_19XR_1403kW_7_09COP_VSD = Buildings.Fluid.Chillers.Data.ElectricReformulatedEIR.Generic(QEva_flow_nominal = -1403100, COP_nominal = 7.09, PLRMin = 0.17, PLRMinUnl = 0.17, PLRMax = 1.03, mEva_flow_nominal = 1000*0.03426, mCon_flow_nominal = 1000*0.04252, TEvaLvg_nominal = 273.15 + 6.67, TConLvg_nominal = 273.15 + 21.78, TEvaLvgMin = 273.15 + 6.67, TEvaLvgMax = 273.15 + 12.22, TConLvgMin = 273.15 + 21.77, TConLvgMax = 273.15 + 33.09, capFunT = {8.573696E-01, -3.077045E-02, -2.171254E-03, 2.296255E-02, -1.067689E-03, 3.125156E-03}, EIRFunT = {1.172049E+00, -1.768334E-02, 3.356460E-04, -1.485826E-02, 6.930197E-04, -5.461447E-04}, EIRFunPLR = {1.386665E-01, 4.836823E-03, -5.406708E-05, -4.609915E-01, 2.214035E+00, -1.925694E-03, 0.000000E+00, -9.302446E-01, 0.000000E+00, 0.000000E+00}, etaMotor = 1.0);
Generated at 2024-12-28T19:26:00Z
by OpenModelicaOpenModelica 1.24.3 using GenerateDoc.mos