Performance data for chiller model.
This data corresponds to the following EnergyPlus model:
Chiller:Electric:ReformulatedEIR,
ReformEIRChiller Carrier 19XR 1407kW/6.04COP/VSD, !- Name
1406600, !- Reference Capacity {W}
6.04, !- Reference COP {W/W}
6.67, !- Reference Leaving Chilled Water Temperature {C}
34.63, !- Reference Leaving Condenser Water Temperature {C}
0.06057, !- Reference Chilled Water Flow Rate {m3/s}
0.07571, !- Reference Condenser Water Flow Rate {m3/s}
ReformEIRChiller Carrier 19XR 1407kW/6.04COP/VSD CAPFT, !- Cooling Capacity Function of Temperature Curve Name
ReformEIRChiller Carrier 19XR 1407kW/6.04COP/VSD EIRFT, !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name
ReformEIRChiller Carrier 19XR 1407kW/6.04COP/VSD EIRFPLR, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name
0.20, !- Minimum Part Load Ratio
1.04, !- Maximum Part Load Ratio
1.0, !- Optimum Part Load Ratio
0.20, !- Minimum Unloading Ratio
Chilled Water Side Inlet Node, !- Chilled Water Inlet Node Name
Chilled Water Side Outlet Node, !- Chilled Water Outlet Node Name
Condenser Side Inlet Node, !- Condenser Inlet Node Name
Condenser Side Outlet Node, !- Condenser Outlet Node Name
1.0, !- Compressor Motor Efficiency
2.0, !- Leaving Chilled Water Lower Temperature Limit {C}
ConstantFlow, !- Chiller Flow Mode Type
0.0; !- Design Heat Recovery Water Flow Rate {m3/s}
record ReformEIRChiller_Carrier_19XR_1407kW_6_04COP_VSD = Buildings.Fluid.Chillers.Data.ElectricReformulatedEIR.Generic(QEva_flow_nominal = -1406600, COP_nominal = 6.04, PLRMin = 0.20, PLRMinUnl = 0.20, PLRMax = 1.04, mEva_flow_nominal = 1000*0.06057, mCon_flow_nominal = 1000*0.07571, TEvaLvg_nominal = 273.15 + 6.67, TConLvg_nominal = 273.15 + 34.63, TEvaLvgMin = 273.15 + 4.44, TEvaLvgMax = 273.15 + 10.00, TConLvgMin = 273.15 + 18.11, TConLvgMax = 273.15 + 37.42, capFunT = {9.006457E-01, -1.139681E-02, -1.480623E-03, 2.770949E-02, -9.617215E-04, 1.812986E-03}, EIRFunT = {1.174615E+00, -1.237741E-02, -1.147159E-03, -2.996332E-02, 8.901939E-04, -2.302077E-04}, EIRFunPLR = {-5.839828E-01, 4.640814E-02, -7.366007E-05, -1.926398E-01, 2.597682E+00, -4.268655E-02, 0.000000E+00, -8.666390E-01, 0.000000E+00, 0.000000E+00}, etaMotor = 1.0);
Generated at 2024-12-28T19:26:00Z
by OpenModelicaOpenModelica 1.24.3 using GenerateDoc.mos