Performance data for chiller model.
This data corresponds to the following EnergyPlus model:
Chiller:Electric:ReformulatedEIR,
ReformEIRChiller Carrier 19XR 1586kW/5.53COP/VSD, !- Name
1586000, !- Reference Capacity {W}
5.53, !- Reference COP {W/W}
8.89, !- Reference Leaving Chilled Water Temperature {C}
36.26, !- Reference Leaving Condenser Water Temperature {C}
0.03388, !- Reference Chilled Water Flow Rate {m3/s}
0.04669, !- Reference Condenser Water Flow Rate {m3/s}
ReformEIRChiller Carrier 19XR 1586kW/5.53COP/VSD CAPFT, !- Cooling Capacity Function of Temperature Curve Name
ReformEIRChiller Carrier 19XR 1586kW/5.53COP/VSD EIRFT, !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name
ReformEIRChiller Carrier 19XR 1586kW/5.53COP/VSD EIRFPLR, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name
0.19, !- Minimum Part Load Ratio
1.01, !- Maximum Part Load Ratio
1.0, !- Optimum Part Load Ratio
0.19, !- Minimum Unloading Ratio
Chilled Water Side Inlet Node, !- Chilled Water Inlet Node Name
Chilled Water Side Outlet Node, !- Chilled Water Outlet Node Name
Condenser Side Inlet Node, !- Condenser Inlet Node Name
Condenser Side Outlet Node, !- Condenser Outlet Node Name
1.0, !- Compressor Motor Efficiency
2.0, !- Leaving Chilled Water Lower Temperature Limit {C}
ConstantFlow, !- Chiller Flow Mode Type
0.0; !- Design Heat Recovery Water Flow Rate {m3/s}
record ReformEIRChiller_Carrier_19XR_1586kW_5_53COP_VSD = Buildings.Fluid.Chillers.Data.ElectricReformulatedEIR.Generic(QEva_flow_nominal = -1586000, COP_nominal = 5.53, PLRMin = 0.19, PLRMinUnl = 0.19, PLRMax = 1.01, mEva_flow_nominal = 1000*0.03388, mCon_flow_nominal = 1000*0.04669, TEvaLvg_nominal = 273.15 + 8.89, TConLvg_nominal = 273.15 + 36.26, TEvaLvgMin = 273.15 + 7.22, TEvaLvgMax = 273.15 + 12.78, TConLvgMin = 273.15 + 23.36, TConLvgMax = 273.15 + 36.72, capFunT = {1.132174E+00, 8.236001E-04, -8.207587E-04, 2.967657E-03, -3.898313E-04, 1.015830E-03}, EIRFunT = {1.223690E+00, -3.668987E-02, 4.038915E-04, -1.595573E-02, 5.080640E-04, -7.276256E-05}, EIRFunPLR = {3.381660E-01, -2.323866E-02, -7.810564E-06, 1.017389E+00, -8.328919E-01, 2.371783E-02, 0.000000E+00, 4.701559E-01, 0.000000E+00, 0.000000E+00}, etaMotor = 1.0);
Generated at 2024-12-28T19:26:00Z
by OpenModelicaOpenModelica 1.24.3 using GenerateDoc.mos