Performance data for chiller model.
This data corresponds to the following EnergyPlus model:
Chiller:Electric:ReformulatedEIR,
ReformEIRChiller Carrier 19XR 1723kW/8.32COP/VSD, !- Name
1723100, !- Reference Capacity {W}
8.32, !- Reference COP {W/W}
6.11, !- Reference Leaving Chilled Water Temperature {C}
19.44, !- Reference Leaving Condenser Water Temperature {C}
0.04757, !- Reference Chilled Water Flow Rate {m3/s}
0.06934, !- Reference Condenser Water Flow Rate {m3/s}
ReformEIRChiller Carrier 19XR 1723kW/8.32COP/VSD CAPFT, !- Cooling Capacity Function of Temperature Curve Name
ReformEIRChiller Carrier 19XR 1723kW/8.32COP/VSD EIRFT, !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name
ReformEIRChiller Carrier 19XR 1723kW/8.32COP/VSD EIRFPLR, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name
0.18, !- Minimum Part Load Ratio
1.03, !- Maximum Part Load Ratio
1.0, !- Optimum Part Load Ratio
0.18, !- Minimum Unloading Ratio
Chilled Water Side Inlet Node, !- Chilled Water Inlet Node Name
Chilled Water Side Outlet Node, !- Chilled Water Outlet Node Name
Condenser Side Inlet Node, !- Condenser Inlet Node Name
Condenser Side Outlet Node, !- Condenser Outlet Node Name
1.0, !- Compressor Motor Efficiency
2.0, !- Leaving Chilled Water Lower Temperature Limit {C}
ConstantFlow, !- Chiller Flow Mode Type
0.0; !- Design Heat Recovery Water Flow Rate {m3/s}
record ReformEIRChiller_Carrier_19XR_1723kW_8_32COP_VSD = Buildings.Fluid.Chillers.Data.ElectricReformulatedEIR.Generic(QEva_flow_nominal = -1723100, COP_nominal = 8.32, PLRMin = 0.18, PLRMinUnl = 0.18, PLRMax = 1.03, mEva_flow_nominal = 1000*0.04757, mCon_flow_nominal = 1000*0.06934, TEvaLvg_nominal = 273.15 + 6.11, TConLvg_nominal = 273.15 + 19.44, TEvaLvgMin = 273.15 + 6.11, TEvaLvgMax = 273.15 + 12.78, TConLvgMin = 273.15 + 18.07, TConLvgMax = 273.15 + 31.40, capFunT = {1.239005E-01, -7.123944E-02, -2.643936E-03, 9.396468E-02, -2.643737E-03, 4.923920E-03}, EIRFunT = {-1.372893E-01, -1.137042E-01, -3.395214E-03, 1.210097E-01, -2.615543E-03, 4.943923E-03}, EIRFunPLR = {1.363743E+00, -2.534882E-02, 7.213176E-05, -3.644022E+00, 5.935760E+00, 2.202104E-02, 0.000000E+00, -2.617944E+00, 0.000000E+00, 0.000000E+00}, etaMotor = 1.0);
Generated at 2024-11-22T19:25:38Z
by OpenModelicaOpenModelica 1.24.2 using GenerateDoc.mos