Performance data for chiller model.
This data corresponds to the following EnergyPlus model:
Chiller:Electric:ReformulatedEIR,
ReformEIRChiller Carrier 19XR 1727kW/9.04COP/Vanes, !- Name
1726600, !- Reference Capacity {W}
9.04, !- Reference COP {W/W}
7.78, !- Reference Leaving Chilled Water Temperature {C}
19.16, !- Reference Leaving Condenser Water Temperature {C}
0.03912, !- Reference Chilled Water Flow Rate {m3/s}
0.07192, !- Reference Condenser Water Flow Rate {m3/s}
ReformEIRChiller Carrier 19XR 1727kW/9.04COP/Vanes CAPFT, !- Cooling Capacity Function of Temperature Curve Name
ReformEIRChiller Carrier 19XR 1727kW/9.04COP/Vanes EIRFT, !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name
ReformEIRChiller Carrier 19XR 1727kW/9.04COP/Vanes EIRFPLR, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name
0.17, !- Minimum Part Load Ratio
1.02, !- Maximum Part Load Ratio
1.0, !- Optimum Part Load Ratio
0.17, !- Minimum Unloading Ratio
Chilled Water Side Inlet Node, !- Chilled Water Inlet Node Name
Chilled Water Side Outlet Node, !- Chilled Water Outlet Node Name
Condenser Side Inlet Node, !- Condenser Inlet Node Name
Condenser Side Outlet Node, !- Condenser Outlet Node Name
1.0, !- Compressor Motor Efficiency
2.0, !- Leaving Chilled Water Lower Temperature Limit {C}
ConstantFlow, !- Chiller Flow Mode Type
0.0; !- Design Heat Recovery Water Flow Rate {m3/s}
record ReformEIRChiller_Carrier_19XR_1727kW_9_04COP_Vanes = Buildings.Fluid.Chillers.Data.ElectricReformulatedEIR.Generic(QEva_flow_nominal = -1726600, COP_nominal = 9.04, PLRMin = 0.17, PLRMinUnl = 0.17, PLRMax = 1.02, mEva_flow_nominal = 1000*0.03912, mCon_flow_nominal = 1000*0.07192, TEvaLvg_nominal = 273.15 + 7.78, TConLvg_nominal = 273.15 + 19.16, TEvaLvgMin = 273.15 + 4.44, TEvaLvgMax = 273.15 + 8.89, TConLvgMin = 273.15 + 18.94, TConLvgMax = 273.15 + 35.13, capFunT = {2.574689E-01, 2.272600E-03, -5.815624E-03, 6.540193E-02, -1.958828E-03, 3.701057E-03}, EIRFunT = {1.247058E+00, -1.353289E-02, -1.160647E-03, -2.086541E-02, 9.395685E-04, -2.989847E-05}, EIRFunPLR = {1.552467E-02, 1.482533E-02, -2.165341E-05, 9.371381E-01, -5.717707E-01, -1.368813E-02, 0.000000E+00, 6.047782E-01, 0.000000E+00, 0.000000E+00}, etaMotor = 1.0);
Generated at 2024-11-22T19:25:38Z
by OpenModelicaOpenModelica 1.24.2 using GenerateDoc.mos