Performance data for chiller model.
This data corresponds to the following EnergyPlus model:
Chiller:Electric:ReformulatedEIR,
ReformEIRChiller Carrier 19XR 1758kW/5.86COP/VSD, !- Name
1758300, !- Reference Capacity {W}
5.86, !- Reference COP {W/W}
5.56, !- Reference Leaving Chilled Water Temperature {C}
31.15, !- Reference Leaving Condenser Water Temperature {C}
0.06303, !- Reference Chilled Water Flow Rate {m3/s}
0.07337, !- Reference Condenser Water Flow Rate {m3/s}
ReformEIRChiller Carrier 19XR 1758kW/5.86COP/VSD CAPFT, !- Cooling Capacity Function of Temperature Curve Name
ReformEIRChiller Carrier 19XR 1758kW/5.86COP/VSD EIRFT, !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name
ReformEIRChiller Carrier 19XR 1758kW/5.86COP/VSD EIRFPLR, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name
0.20, !- Minimum Part Load Ratio
1.02, !- Maximum Part Load Ratio
1.0, !- Optimum Part Load Ratio
0.20, !- Minimum Unloading Ratio
Chilled Water Side Inlet Node, !- Chilled Water Inlet Node Name
Chilled Water Side Outlet Node, !- Chilled Water Outlet Node Name
Condenser Side Inlet Node, !- Condenser Inlet Node Name
Condenser Side Outlet Node, !- Condenser Outlet Node Name
1.0, !- Compressor Motor Efficiency
2.0, !- Leaving Chilled Water Lower Temperature Limit {C}
ConstantFlow, !- Chiller Flow Mode Type
0.0; !- Design Heat Recovery Water Flow Rate {m3/s}
record ReformEIRChiller_Carrier_19XR_1758kW_5_86COP_VSD = Buildings.Fluid.Chillers.Data.ElectricReformulatedEIR.Generic(QEva_flow_nominal = -1758300, COP_nominal = 5.86, PLRMin = 0.20, PLRMinUnl = 0.20, PLRMax = 1.02, mEva_flow_nominal = 1000*0.06303, mCon_flow_nominal = 1000*0.07337, TEvaLvg_nominal = 273.15 + 5.56, TConLvg_nominal = 273.15 + 31.15, TEvaLvgMin = 273.15 + 5.56, TEvaLvgMax = 273.15 + 10.00, TConLvgMin = 273.15 + 17.86, TConLvgMax = 273.15 + 31.43, capFunT = {9.528317E-02, -4.119086E-02, -3.854298E-03, 7.698517E-02, -1.945011E-03, 4.285126E-03}, EIRFunT = {-6.333861E-02, -5.533069E-02, -4.591740E-03, 7.468402E-02, -1.455300E-03, 3.506040E-03}, EIRFunPLR = {1.251509E+00, -9.433150E-02, -2.849753E-05, 8.544238E-01, -1.491994E+00, 9.568956E-02, 0.000000E+00, 3.698862E-01, 0.000000E+00, 0.000000E+00}, etaMotor = 1.0);
Generated at 2024-11-22T19:25:38Z
by OpenModelicaOpenModelica 1.24.2 using GenerateDoc.mos