Performance data for chiller model.
This data corresponds to the following EnergyPlus model:
Chiller:Electric:ReformulatedEIR,
ReformEIRChiller Carrier 19XR 2391kW/6.44COP/VSD, !- Name
2391300, !- Reference Capacity {W}
6.44, !- Reference COP {W/W}
7.22, !- Reference Leaving Chilled Water Temperature {C}
31.70, !- Reference Leaving Condenser Water Temperature {C}
0.06858, !- Reference Chilled Water Flow Rate {m3/s}
0.0846, !- Reference Condenser Water Flow Rate {m3/s}
ReformEIRChiller Carrier 19XR 2391kW/6.44COP/VSD CAPFT, !- Cooling Capacity Function of Temperature Curve Name
ReformEIRChiller Carrier 19XR 2391kW/6.44COP/VSD EIRFT, !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name
ReformEIRChiller Carrier 19XR 2391kW/6.44COP/VSD EIRFPLR, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name
0.20, !- Minimum Part Load Ratio
1.03, !- Maximum Part Load Ratio
1.0, !- Optimum Part Load Ratio
0.20, !- Minimum Unloading Ratio
Chilled Water Side Inlet Node, !- Chilled Water Inlet Node Name
Chilled Water Side Outlet Node, !- Chilled Water Outlet Node Name
Condenser Side Inlet Node, !- Condenser Inlet Node Name
Condenser Side Outlet Node, !- Condenser Outlet Node Name
1.0, !- Compressor Motor Efficiency
2.0, !- Leaving Chilled Water Lower Temperature Limit {C}
ConstantFlow, !- Chiller Flow Mode Type
0.0; !- Design Heat Recovery Water Flow Rate {m3/s}
record ReformEIRChiller_Carrier_19XR_2391kW_6_44COP_VSD = Buildings.Fluid.Chillers.Data.ElectricReformulatedEIR.Generic(QEva_flow_nominal = -2391300, COP_nominal = 6.44, PLRMin = 0.20, PLRMinUnl = 0.20, PLRMax = 1.03, mEva_flow_nominal = 1000*0.06858, mCon_flow_nominal = 1000*0.0846, TEvaLvg_nominal = 273.15 + 7.22, TConLvg_nominal = 273.15 + 31.70, TEvaLvgMin = 273.15 + 6.67, TEvaLvgMax = 273.15 + 12.22, TConLvgMin = 273.15 + 19.76, TConLvgMax = 273.15 + 32.68, capFunT = {-1.105784E-01, -7.215657E-02, -1.924398E-03, 1.073110E-01, -2.578512E-03, 4.153768E-03}, EIRFunT = {6.030335E-01, -1.099862E-02, 6.898379E-04, 1.213607E-02, 2.415707E-04, -7.792847E-04}, EIRFunPLR = {1.309393E-01, 1.443518E-02, -9.784460E-07, -8.596110E-01, 2.724452E+00, -1.436270E-02, 0.000000E+00, -9.969677E-01, 0.000000E+00, 0.000000E+00}, etaMotor = 1.0);
Generated at 2024-12-28T19:26:00Z
by OpenModelicaOpenModelica 1.24.3 using GenerateDoc.mos