Performance data for chiller model.
This data corresponds to the following EnergyPlus model:
Chiller:Electric:ReformulatedEIR,
ReformEIRChiller Carrier 23XL 1108kW/6.92COP/Valve, !- Name
1107700, !- Reference Capacity {W}
6.92, !- Reference COP {W/W}
8.97, !- Reference Leaving Chilled Water Temperature {C}
29.64, !- Reference Leaving Condenser Water Temperature {C}
0.0571, !- Reference Chilled Water Flow Rate {m3/s}
0.05142, !- Reference Condenser Water Flow Rate {m3/s}
ReformEIRChiller Carrier 23XL 1108kW/6.92COP/Valve CAPFT, !- Cooling Capacity Function of Temperature Curve Name
ReformEIRChiller Carrier 23XL 1108kW/6.92COP/Valve EIRFT, !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name
ReformEIRChiller Carrier 23XL 1108kW/6.92COP/Valve EIRFPLR, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name
0.20, !- Minimum Part Load Ratio
1.02, !- Maximum Part Load Ratio
1.0, !- Optimum Part Load Ratio
0.20, !- Minimum Unloading Ratio
Chilled Water Side Inlet Node, !- Chilled Water Inlet Node Name
Chilled Water Side Outlet Node, !- Chilled Water Outlet Node Name
Condenser Side Inlet Node, !- Condenser Inlet Node Name
Condenser Side Outlet Node, !- Condenser Outlet Node Name
1.0, !- Compressor Motor Efficiency
2.0, !- Leaving Chilled Water Lower Temperature Limit {C}
ConstantFlow, !- Chiller Flow Mode Type
0.0; !- Design Heat Recovery Water Flow Rate {m3/s}
record ReformEIRChiller_Carrier_23XL_1108kW_6_92COP_Valve = Buildings.Fluid.Chillers.Data.ElectricReformulatedEIR.Generic(QEva_flow_nominal = -1107700, COP_nominal = 6.92, PLRMin = 0.20, PLRMinUnl = 0.20, PLRMax = 1.02, mEva_flow_nominal = 1000*0.0571, mCon_flow_nominal = 1000*0.05142, TEvaLvg_nominal = 273.15 + 8.97, TConLvg_nominal = 273.15 + 29.64, TEvaLvgMin = 273.15 + 5.56, TEvaLvgMax = 273.15 + 10.00, TConLvgMin = 273.15 + 18.28, TConLvgMax = 273.15 + 30.24, capFunT = {5.158330E-01, -2.311637E-02, -7.013270E-04, 4.106942E-02, -1.177302E-03, 2.292450E-03}, EIRFunT = {5.272297E-01, -1.879890E-02, 1.120482E-03, 1.100352E-02, 6.338503E-04, -1.251189E-03}, EIRFunPLR = {2.638449E+00, -1.139810E-01, -1.028538E-04, -2.382279E+00, 2.715083E+00, 1.187905E-01, 0.000000E+00, -2.025240E+00, 0.000000E+00, 0.000000E+00}, etaMotor = 1.0);
Generated at 2024-12-28T19:26:00Z
by OpenModelicaOpenModelica 1.24.3 using GenerateDoc.mos