Performance data for chiller model.
This data corresponds to the following EnergyPlus model:
Chiller:Electric:ReformulatedEIR,
ReformEIRChiller Carrier 23XL 724kW/6.04COP/Vanes, !- Name
724400, !- Reference Capacity {W}
6.04, !- Reference COP {W/W}
5.56, !- Reference Leaving Chilled Water Temperature {C}
31.44, !- Reference Leaving Condenser Water Temperature {C}
0.01779, !- Reference Chilled Water Flow Rate {m3/s}
0.01956, !- Reference Condenser Water Flow Rate {m3/s}
ReformEIRChiller Carrier 23XL 724kW/6.04COP/Vanes CAPFT, !- Cooling Capacity Function of Temperature Curve Name
ReformEIRChiller Carrier 23XL 724kW/6.04COP/Vanes EIRFT, !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name
ReformEIRChiller Carrier 23XL 724kW/6.04COP/Vanes EIRFPLR, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name
0.19, !- Minimum Part Load Ratio
1.03, !- Maximum Part Load Ratio
1.0, !- Optimum Part Load Ratio
0.19, !- Minimum Unloading Ratio
Chilled Water Side Inlet Node, !- Chilled Water Inlet Node Name
Chilled Water Side Outlet Node, !- Chilled Water Outlet Node Name
Condenser Side Inlet Node, !- Condenser Inlet Node Name
Condenser Side Outlet Node, !- Condenser Outlet Node Name
1.0, !- Compressor Motor Efficiency
2.0, !- Leaving Chilled Water Lower Temperature Limit {C}
ConstantFlow, !- Chiller Flow Mode Type
0.0; !- Design Heat Recovery Water Flow Rate {m3/s}
record ReformEIRChiller_Carrier_23XL_724kW_6_04COP_Vanes = Buildings.Fluid.Chillers.Data.ElectricReformulatedEIR.Generic(QEva_flow_nominal = -724400, COP_nominal = 6.04, PLRMin = 0.19, PLRMinUnl = 0.19, PLRMax = 1.03, mEva_flow_nominal = 1000*0.01779, mCon_flow_nominal = 1000*0.01956, TEvaLvg_nominal = 273.15 + 5.56, TConLvg_nominal = 273.15 + 31.44, TEvaLvgMin = 273.15 + 5.56, TEvaLvgMax = 273.15 + 10.00, TConLvgMin = 273.15 + 22.12, TConLvgMax = 273.15 + 35.40, capFunT = {-1.116010E-01, -1.058351E-01, -1.829692E-03, 9.677921E-02, -2.169221E-03, 4.998660E-03}, EIRFunT = {5.899136E-01, 1.976846E-02, 8.755088E-04, -7.564222E-03, 8.775130E-04, -2.036856E-03}, EIRFunPLR = {3.645490E-01, 2.732140E-03, -5.356774E-05, 1.212025E-01, 5.491750E-01, 2.083941E-04, 0.000000E+00, -7.516191E-02, 0.000000E+00, 0.000000E+00}, etaMotor = 1.0);
Generated at 2024-11-22T19:25:38Z
by OpenModelicaOpenModelica 1.24.2 using GenerateDoc.mos