Performance data for chiller model.
This data corresponds to the following EnergyPlus model:
Chiller:Electric:ReformulatedEIR,
ReformEIRChiller Trane CVHE 1372kW/7.49COP/Vanes, !- Name
1371500, !- Reference Capacity {W}
7.49, !- Reference COP {W/W}
5.56, !- Reference Leaving Chilled Water Temperature {C}
28.80, !- Reference Leaving Condenser Water Temperature {C}
0.05047, !- Reference Chilled Water Flow Rate {m3/s}
0.07571, !- Reference Condenser Water Flow Rate {m3/s}
ReformEIRChiller Trane CVHE 1372kW/7.49COP/Vanes CAPFT, !- Cooling Capacity Function of Temperature Curve Name
ReformEIRChiller Trane CVHE 1372kW/7.49COP/Vanes EIRFT, !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name
ReformEIRChiller Trane CVHE 1372kW/7.49COP/Vanes EIRFPLR, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name
0.41, !- Minimum Part Load Ratio
1.11, !- Maximum Part Load Ratio
1.0, !- Optimum Part Load Ratio
0.41, !- Minimum Unloading Ratio
Chilled Water Side Inlet Node, !- Chilled Water Inlet Node Name
Chilled Water Side Outlet Node, !- Chilled Water Outlet Node Name
Condenser Side Inlet Node, !- Condenser Inlet Node Name
Condenser Side Outlet Node, !- Condenser Outlet Node Name
1.0, !- Compressor Motor Efficiency
2.0, !- Leaving Chilled Water Lower Temperature Limit {C}
ConstantFlow, !- Chiller Flow Mode Type
0.0; !- Design Heat Recovery Water Flow Rate {m3/s}
record ReformEIRChiller_Trane_CVHE_1372kW_7_49COP_Vanes = Buildings.Fluid.Chillers.Data.ElectricReformulatedEIR.Generic(QEva_flow_nominal = -1371500, COP_nominal = 7.49, PLRMin = 0.41, PLRMinUnl = 0.41, PLRMax = 1.11, mEva_flow_nominal = 1000*0.05047, mCon_flow_nominal = 1000*0.07571, TEvaLvg_nominal = 273.15 + 5.56, TConLvg_nominal = 273.15 + 28.80, TEvaLvgMin = 273.15 + 4.44, TEvaLvgMax = 273.15 + 8.89, TConLvgMin = 273.15 + 17.87, TConLvgMax = 273.15 + 34.26, capFunT = {3.397637E-01, 3.431595E-02, -1.008753E-02, 5.766544E-02, -2.300721E-03, 6.035544E-03}, EIRFunT = {1.033692E+00, 3.558404E-02, 3.589722E-03, -2.717762E-02, 1.379031E-03, -4.158610E-03}, EIRFunPLR = {4.723036E-01, 8.571830E-03, 4.576667E-05, -1.502847E+00, 3.731872E+00, -1.107635E-02, 0.000000E+00, -1.669562E+00, 0.000000E+00, 0.000000E+00}, etaMotor = 1.0);
Generated at 2024-12-28T19:26:00Z
by OpenModelicaOpenModelica 1.24.3 using GenerateDoc.mos