Performance data for chiller model.
This data corresponds to the following EnergyPlus model:
Chiller:Electric:ReformulatedEIR,
ReformEIRChiller Trane CVHF 1779kW/6.18COP/Vanes, !- Name
1779400, !- Reference Capacity {W}
6.18, !- Reference COP {W/W}
5.56, !- Reference Leaving Chilled Water Temperature {C}
33.51, !- Reference Leaving Condenser Water Temperature {C}
0.04454, !- Reference Chilled Water Flow Rate {m3/s}
0.05142, !- Reference Condenser Water Flow Rate {m3/s}
ReformEIRChiller Trane CVHF 1779kW/6.18COP/Vanes CAPFT, !- Cooling Capacity Function of Temperature Curve Name
ReformEIRChiller Trane CVHF 1779kW/6.18COP/Vanes EIRFT, !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name
ReformEIRChiller Trane CVHF 1779kW/6.18COP/Vanes EIRFPLR, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name
0.10, !- Minimum Part Load Ratio
1.02, !- Maximum Part Load Ratio
1.0, !- Optimum Part Load Ratio
0.10, !- Minimum Unloading Ratio
Chilled Water Side Inlet Node, !- Chilled Water Inlet Node Name
Chilled Water Side Outlet Node, !- Chilled Water Outlet Node Name
Condenser Side Inlet Node, !- Condenser Inlet Node Name
Condenser Side Outlet Node, !- Condenser Outlet Node Name
1.0, !- Compressor Motor Efficiency
2.0, !- Leaving Chilled Water Lower Temperature Limit {C}
ConstantFlow, !- Chiller Flow Mode Type
0.0; !- Design Heat Recovery Water Flow Rate {m3/s}
record ReformEIRChiller_Trane_CVHF_1779kW_6_18COP_Vanes = Buildings.Fluid.Chillers.Data.ElectricReformulatedEIR.Generic(QEva_flow_nominal = -1779400, COP_nominal = 6.18, PLRMin = 0.10, PLRMinUnl = 0.10, PLRMax = 1.02, mEva_flow_nominal = 1000*0.04454, mCon_flow_nominal = 1000*0.05142, TEvaLvg_nominal = 273.15 + 5.56, TConLvg_nominal = 273.15 + 33.51, TEvaLvgMin = 273.15 + 5.56, TEvaLvgMax = 273.15 + 10.00, TConLvgMin = 273.15 + 27.96, TConLvgMax = 273.15 + 34.47, capFunT = {-1.379667E-01, -8.817299E-02, -1.551247E-03, 9.297586E-02, -1.943005E-03, 4.050538E-03}, EIRFunT = {3.679272E-01, 3.649996E-03, -1.333659E-03, 6.605569E-03, 4.699578E-04, -5.527094E-04}, EIRFunPLR = {6.454991E-03, 1.094255E-02, 5.090580E-05, 8.866733E-01, -4.314429E-01, -1.400320E-02, 0.000000E+00, 5.835670E-01, 0.000000E+00, 0.000000E+00}, etaMotor = 1.0);
Generated at 2024-11-22T19:25:38Z
by OpenModelicaOpenModelica 1.24.2 using GenerateDoc.mos