Performance data for chiller model.
This data corresponds to the following EnergyPlus model:
Chiller:Electric:ReformulatedEIR,
ReformEIRChiller Trane CVHF 2184kW/6.78COP/Vanes, !- Name
2183800, !- Reference Capacity {W}
6.78, !- Reference COP {W/W}
7.78, !- Reference Leaving Chilled Water Temperature {C}
35.55, !- Reference Leaving Condenser Water Temperature {C}
0.04883, !- Reference Chilled Water Flow Rate {m3/s}
0.05142, !- Reference Condenser Water Flow Rate {m3/s}
ReformEIRChiller Trane CVHF 2184kW/6.78COP/Vanes CAPFT, !- Cooling Capacity Function of Temperature Curve Name
ReformEIRChiller Trane CVHF 2184kW/6.78COP/Vanes EIRFT, !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name
ReformEIRChiller Trane CVHF 2184kW/6.78COP/Vanes EIRFPLR, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name
0.09, !- Minimum Part Load Ratio
1.01, !- Maximum Part Load Ratio
1.0, !- Optimum Part Load Ratio
0.09, !- Minimum Unloading Ratio
Chilled Water Side Inlet Node, !- Chilled Water Inlet Node Name
Chilled Water Side Outlet Node, !- Chilled Water Outlet Node Name
Condenser Side Inlet Node, !- Condenser Inlet Node Name
Condenser Side Outlet Node, !- Condenser Outlet Node Name
1.0, !- Compressor Motor Efficiency
2.0, !- Leaving Chilled Water Lower Temperature Limit {C}
ConstantFlow, !- Chiller Flow Mode Type
0.0; !- Design Heat Recovery Water Flow Rate {m3/s}
record ReformEIRChiller_Trane_CVHF_2184kW_6_78COP_Vanes = Buildings.Fluid.Chillers.Data.ElectricReformulatedEIR.Generic(QEva_flow_nominal = -2183800, COP_nominal = 6.78, PLRMin = 0.09, PLRMinUnl = 0.09, PLRMax = 1.01, mEva_flow_nominal = 1000*0.04883, mCon_flow_nominal = 1000*0.05142, TEvaLvg_nominal = 273.15 + 7.78, TConLvg_nominal = 273.15 + 35.55, TEvaLvgMin = 273.15 + 5.56, TEvaLvgMax = 273.15 + 10.00, TConLvgMin = 273.15 + 30.67, TConLvgMax = 273.15 + 36.06, capFunT = {1.214452E+00, -1.495671E-02, -2.934194E-03, 1.568925E-02, -9.780218E-04, 2.723254E-03}, EIRFunT = {1.286650E+00, 3.478277E-02, 2.888239E-03, -4.763798E-02, 1.463610E-03, -3.194170E-03}, EIRFunPLR = {2.473025E+00, -1.277887E-01, -3.279364E-05, -3.156699E-01, -3.527895E-01, 1.304080E-01, 0.000000E+00, -8.547163E-01, 0.000000E+00, 0.000000E+00}, etaMotor = 1.0);
Generated at 2024-11-22T19:25:38Z
by OpenModelicaOpenModelica 1.24.2 using GenerateDoc.mos